Big wave roof corrugated machine , 780mm cover width
Quick Detail:
- Thickness : 0.4-0.8mm
- Material : G345-550, pre-painted sheets
- Input width : 1250mm
- Effective width: 980+/-4mm
- Material weight: 5MT
- Coil inner diameter : 508mm
- Driven way: by 7.5KW driven motor
- Cutting way: by 4kw hydraulic power pack
- Cutting tolerance : ±1mm
Machine list:
- Hydraulic un-coiler with/without coil car
- Entry bench & Manual pre-shearing device
- Roll forming machine
- Hydraulic cutting device
- Product Rack
- PLC control systems
Description/Technical Parameter details of complete line:
- 5TX1250mm hydraulic de-coiler
Hydraulic system to expand coil inner hole, Pump motor: 3KW
Driving motor to turn the coil, 3KW,
Manual frequency speed control
Coil Inner-diameter= 510±30mm
Load Capacity: Max. 5 Tons
Coil Width Max. 1250mm
Taper wedge expand type
- Entry Roller & Manual Pre-shearing device (Un-powered)
Smart cut control
To cut off the end of the final piece of sheet only
Working thickness: max. 0.8mm
- Roll forming machine details as below table :
| Suitable roll forming material | Pre-painted coil |
| Thickness | 0.4mm-0.8mm |
| Coil input width | 1250mm |
| Carriage Frame design | Wall-plate-frame-design /New-stand-frame-design |
| Roll forming stages | 20 stages |
| Roller material | 45# steel, CNC lathes, Hard Chrome Coated |
| Shafts Diameter | Φ75mm |
| Main motor power | 7.5Kw with reducer |
| Roll forming speed | 18m/min (Higher speed is available, depends on the specification required by the buyer) |
| Electric Voltage Standard | 380V/50Hz/3PH or as the customer's requirements |
| Major Color of Machine Painted | RAL 5015(Blue) or as per customer’s requirements |
Stop to cut, Post cut, No Blanking cut
Cutting tool material: Cr12, Heat treatment
Hydraulic Group, Pump motor =4KW
Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder
Cut-to-length tolerance≤±1mm
Control Voltage 24V
- Product Rack Un-powered, 3 units
Brief Introduction:
Compared to traditional clay tiles, stone or brick cladding, corrugated sheets give a traditional look, yet weigh lighter and have longer life circle. In fact, corrugated metal roofing is the only cladding that should be used in conservation areas.
To sum up, there are regular corrugated sheet roll forming machine and special usage corrugated sheet machine.
Profile Drawing/Layout/Equipment reference pictures:
Product Tags:
|
|
Big Wave Corrugated Roll Forming Machine With 780mm Cover Width CE Approved Images
|
